Audiovox Satellite Radio XMCK30P User Manual

1
2
3
4
What’s in the Box?  
XpressRC functions  
5-way navigation knob  
If you placed the XM antenna on the front  
of the vehicle, route the cable across the  
top of the windshield. Gently pry up the  
rubber weather seal and tuck the cable  
underneath. Follow the weather seal  
down to the door jam. Tuck the cable into  
the door jam and up to the dash or under  
the carpet to the car cradle as shown.  
• Turn the knob to scroll through a list.  
60-Minute Replay Buttons  
Pause and replay up to 60  
minutes of live XM broadcast.  
Display  
Customize the way you view  
content on the display  
• Press the center of the XM button to make a selection.  
• Press the edge of the XM button to select display, jump,  
info  
display  
mute  
menu  
+
or  
.
Power Button  
1
2
5
8
0
3
6
Cassett Adaptor  
4
7
XM Button  
Confirms selection for  
channel and menu items, also  
press and hold to GameSelect,  
to TuneSelect or to save a song.  
9
XpressRC  
Swivel Mount  
Preparation Kit  
jump  
fav  
Remote Control  
Left and Right Arrows  
Search for channels by  
category.  
Press center button Toggle right  
(XM button)  
Toggle left  
Toggle up  
Toggle down  
Swivel Mount  
Vent Mount  
If you placed the XM antenna on the  
rear of the vehicle, route the cable  
under the weather seal of the rear  
window. Route it into the trunk and  
through any existing wire passages or  
cargo passages to the rear passenger  
compartment. Tuck the cable under the  
door jam trim or under the carpet to  
the radio as shown.  
5-way Navigation  
Knob  
Previews channels; also selects  
various menu options.  
Car Power Adapter  
Vehicle Installation  
Car Cradle  
Step 1: Mount the XM Antenna  
Menu  
1
Choose the best location for your XM  
antenna considering your own  
XM Car Antenna  
Access advanced features  
and configuration options.  
WARNINGS:  
personal situation. Pay particular  
attention to any accessories that you  
may have like luggage racks and how  
frequently you may use them.  
When using this product it is always important to keep your eyes on the road and hands on  
Fav  
Number Keys  
Enter a channel  
directly, select your  
Info  
Jump  
the wheel. Not doing so could result in personal injury, death, and/or damage to your XpressRC  
Receiver, accessories, and/or to your vehicle or other property.  
Choose among direct  
channel entry, favorite  
channels, and SongSaver  
mode.  
Displays either your  
personal stock or info  
Switches between  
current channel and  
previous channel.  
Magnet  
TIP! Always be careful to include enough slack in your cable to accommodate  
open doors or trunk lids. Use things typically found around the home, like  
electrical tape, to secure cables in areas so that hinges do not pinch the cable  
with the door. Hide any excess cable in the trim.  
favorite channels, or extras information.  
access songs saved  
XpressRC should be placed in your vehicle where it will not interfere with the function of  
safety features, e.g., deployment of airbags. Failure to correctly place Xpress may result in injury  
to you or others if the unit becomes detached during an accident and/or obstructs the deploy-  
ment of an airbag.  
in SongSaver.  
The XM antenna contains a strong magnet which  
will stick to any metal parts of your vehicle.  
5
7
6
8
Step 3: Connect your XpressRC  
Step 2: Install the vent or swivel mount  
You can use either the vent mount or the swivel mount for your  
XpressRC depending on your particular situation.  
Installing the swivel mount  
1
2
3
Plug the antenna into ANT IN on the cradle.  
CAUTION: The adhesive used with the swivel mount may make it difficult to remove. Do not  
install this mount on leather surfaces and make sure the air temperature is at least 60°F (15°C).  
Plug the power adapter into DC IN on the cradle.  
Plug the audio adapter into AUDIO OUT on the cradle.  
Installing the vent mount  
1
Locate a flat surface for the mount. Make sure there is ample room  
for the XM cradle and radio when installed.  
1
Locate a vent with horizontal slats sturdy enough  
to hold your XM cradle and radio.  
• Use the Cassette Adapter if your vehicle has a built-in cassette player.  
• Use a mini audio cable (sold separately) if your vehicle has  
an audio input jack.  
Vent Mount  
DC IN  
ANT IN  
AU  
D
IO OUT  
2
3
Clean the surface with the preparation kit and let it dry thoroughly.  
2
3
Adjust the clamps to fit your vent.  
Snap the mount onto the vent.  
Peel off the adhesive liner. Position, press, and hold the swivel mount  
in place for 30 seconds.  
XpressRC Car Cradle  
Extra Adhesive  
Pad  
4
5
Insert the cradle into the mount.  
Insert your XpressRC into the cradle.  
To remove, push the mount into the vent, then lift up.  
IMPORTANT: Let the adhesive cure for 24 hours before attaching the XM  
cradle and radio to the mount.  
NOTE: If your car does not contain a cassette player or an audio input, you will need to  
use either the XM SureConnect (sold separately) or the FM Direct adapter (sold separately).  
4
Turn the swivel to accommodate the XM cradle and radio. Adjust the tension via  
the center screw.  
Power Adapter  
XM SureConnect (sold separately): You can listen to your XpressRC through your car  
stereo by using XpressRC’s built-in FM modulator and the XM SureConnect. Simply find  
an unused FM frequency on the stereo and set your XpressRC to transmit on that same  
frequency. Refer to Set the FM frequency page in your user guide for more information.  
Dash  
Dash  
Swivel Mount  
You can adjust this screw  
to adjust the tension of the  
mount with a screwdriver.  
XM Antenna  
Vent  
Vent  
FM Direct Adapter (sold separately): This option directly connects the XpressRC to your  
car’s audio system and antenna. A professional installation is recommended if you choose  
to use this method.  
Cassette Adapter  
To remove, carefully lift the adhesive pad with your fingers or a spoon. Warming  
the pad with a hair dryer for several minutes will help soften the adhesive.  
You can reinstall the swivel mount using the extra adhesive pad.  
 

3Com Switch 3CR17660 91 User Manual
3M Projector X64 User Manual
Acer Personal Computer 5330 User Manual
Acnodes Computer Hardware FES 8914 User Manual
AeroGarden Greenhouse Kit 100302 BLK User Manual
Aleratec Fax Machine 310109 User Manual
AmbiCom Network Card WP SA User Manual
AMX Stereo Amplifier DAS TAMP4 SIG User Manual
ATI Technologies Computer Hardware GL 8800 User Manual
Beko Freezer BK 8182 User Manual