Audiovox Car Stereo System AVD400T User Manual

R
AVD 400T  
C
2004 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y.11788  
128 - 7109  
 
A . Welcome  
H. Specification  
Thank you for choosing the AVD400T DVD Player. The AVD400T is  
designed to optimize the enjoyment of your favorite DVDs in the mo-  
bile environment. This DVD Player is constructed to provide years of  
reliable, trouble-free service. Please read this manual thoroughly prior to  
operating the player and save it for future reference.  
Supported media  
Signal format system  
DVD Video format  
DVD / CD / MP3/ JPEG CD-R  
NTSC/PAL  
Horizontal 720 pixel,  
vertical 480 pixel  
1.0 Vp-p/75 Ohm  
Video output  
Audio output  
1.2 V to 1.8 V  
More than 60 dB  
B. Precautions  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
Wow and flutter  
Power source  
Less than 60 dB  
More than 70 dB  
EXPLANATION OF GRAPHIC SYMBOLS  
Beyond measurable Limits  
DC 12 V Regulated  
Less than 1W in stand-by mode;  
and less than 12W in use  
0 C (32 F) to +40 C (104 F)  
-20 C (-4 F) to +60 C (140 F)  
5% to 95%  
Power consumption  
Operating temperature  
Storage temperature  
Operating humidity  
CAUTION: TO REDUCE THE RISK OFELECTRIC SHOCK, DO  
NOT REMOVE COVER OR BACK. NO USER -SERVICEABLE  
PARTS INSIDE. REFERSERVICING TO QUALIFIED PERSONNEL.  
Dimensions (W x H x D)  
7 x 2 x 7.3 inches  
(178 x 50 x 186 mm)  
3 lbs (1.6 kg)  
The lighting flash with arrowhead symbol, within an equilateral  
triangle, is intended to alert the user to the presence of uninsulated  
dangerous voltage within the products enclosure that may be  
of sufficient magnitude to constitute risk of electric shock to  
persons.  
Weight  
The exclamation point within an equilateral triangle is intended  
to alert the user to the presence of important operating and main-  
tenance (servicing) instructions in the literature  
accompanying the appliance.  
WARNING:  
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT  
EXPOSE THIS DEVICE TO MOISTURE.  
20  
1
 
IMPORTANT NOTICE  
HOW TO WATCH TV  
An LCD panel and/or video monitor may be installed in a motor vehicle and  
visible to the driver if the LCD panel or video monitor is used for vehicle  
information, system control, rear or side observation or navigation. If the  
LCD panel or video monitor is used for television reception, video or DVD  
play, the LCD panel or video monitor must be installed so that these features  
will only function when the vehicle is in"park" or when the vehicle's parking  
brake is applied.  
Press the Mode button to go to the TV mode. Active channels can be auto stored  
B
by pressing STOP ( MEMORY) button.  
C
Select the channels you want by pressing NEXT (CH+) button or PREVIOUS  
D
(CH-) button (see page 14 remote controller picture).  
Note: Channels may not be selectable if in a bad RF signal area.  
An LCD panel or video monitor used for television reception, video or DVD  
play that operates when the vehicle is in gear or when the parking brake is  
not applied must be installed to the rear of the driver s seat where it will  
not be visible, directly or indirectly, to the operator of the motor vehicle.  
ADD/DEL  
Use this function to delete or memorize a channel you want.  
Select the channel you want by pressing the number buttons and add or  
1. OBJECT AND LIQUID  
Do not insert objects of any kind into the system through its openings;  
do not spill or spray liquid on or into the system (this may result in a  
fire or electric shock). Do not place heavy objects on the unit. To ensure  
proper ventilation and proper operation, never cover or block the slots  
and openings.  
A
erase the channel by pressing ENTER (ADD/DEL) button.  
Remote Control:  
2. DISASSEMBLE  
A
Do not attempt to disassemble the unit. There is a risk of electric shock  
and/or exposure to Laser Radiation. Contact qualified service personnel  
if your system is in need of repair.  
Enter  
/Add  
B
C
/CH+  
D
/CH-  
3. CLEANING UNIT  
When cleaning, make sure the system is unplugged from the power  
source. Do not use any solvents or cleaning materials. Clean the DVD  
player using a lightly dampened lint free cloth to wipe the unit.  
2
19  
 
4) Select Rating by using the LEFT/RIGHT buttons, press ENTER  
to enter the Rating set up page.  
4. DISC  
Do not use irregularly shaped discs such as heart or star-shaped discs  
as they may cause the unit to malfunction. Do not stick paper ,tape or  
glue on the disc. Do not expose the disc to direct sunlight or heat sou-  
rces. Do not touch the surface of the disc. Handle the disc by its edges.  
Clean the disc by wiping the disc from the center out with a soft lint free  
cleaning cloth. Remove the disc from the unit and store it in its case after  
playing. Some playback operations of discs may be intentionally fixed  
by software producers .The AVD400T plays discs according to the disc  
contents the software producers designed therefore some playback  
features may not be available. Refer to the instructions supplied with the  
discs.  
Load Factory  
----  
&. Asult  
Reset  
Rating Display  
Select Password using the UP/DOWN buttons. For first time use  
the default password 3308 to unlock the unit. Select Rating using  
the UP / DOWN buttons and press ENTER to enter the submenu.  
Select the rating level you desire by repeatedly pressing the ENTER  
button .Use the UP button to return to Password and input either  
the default password or any new 4 digit password and press ENTER.  
5. Powering the DVD Player  
This system MUST be powered from switched (Accessory) power as  
indicated on the marking label. Power should be applied to the unit when  
the ignition key is in the Run and/or Accessory position. Use only the  
supplied power cable provided with this set to avoid electric hazards.  
6. Operation  
Rating:1.Kid Safe 2.G 3.PG 4.PG-13  
5.PG-R 6.R 7.NC-17 8.Adult  
When the temperature rises dramatically from a very low temperature,  
moisture may condense inside the AVD400T and cause the DVD player  
to malfunction. If the AVD400T does not operate properly under these  
conditions leave the AVD400T turned on for at least 30 minutes for the  
moisture to evaporate.  
NOTE: For 1st time use the default password is 3308.  
NOTE: The Default Password is 3308. This password is always  
effective even after you have selected your own password and  
changed it. To avoid the possibility of others using the default  
password to set the parental level and change the password, you  
can record this default password in another area and delete it  
from this manual. Some discs can be limited depending on the  
age of users while some discs can not.  
Restore Default: To restore all of the options to the default settings  
select RESTORE DEFAULT using the UP/DOWN buttons and  
press ENTER . This will return all of the settings except parental to  
the default settings.  
18  
3
 
Lpcm 48k DS Display  
C. Contents  
1. 1 Main Unit  
b. Select ' LPCM ' using the UP/DOWN buttons, then press ENTER  
to enter the submenu. Select the digital output you desire using the  
UP/DOWN buttons, then press ENTER to confirm the setting.  
2. 1 Remote control with one Battery (CR2025)  
3. 1 12VDC Power Harness  
4. 2 Brackets with 4 Screws  
5. 1 Remote IR Receiver  
6. 1 AV cable (RCA to RCA)  
Language  
Video  
Audio  
Rating  
Digital out  
Lpcm 48k DS  
RAW  
Off  
Off  
On  
7. 1 AV cable (1/8 to RCA)  
8. 1 Owner's Manual  
9. 4 Stick-on Rubber Feet  
1
9
2
3
4
5
6
7
8
D. Controls  
Main Unit (Refer to Figure 1)  
1. Power Button  
2. Previous Button  
12  
10  
11  
18  
3. Next Button  
4. Mode Button  
17  
5. Remote Control Sensor  
6. Stop /Play /Pause Button  
7. A/V 2Audio Input Jack  
8. A/V 2 Video Input Jack  
9. Eject Button  
16  
15  
14  
13  
19  
10. IR Input  
11.A/V 1 Input Jacks  
12. Digital Audio Output  
13. Audio R Output Jack  
14. Audio L Output Jack  
15. Video Output Jack  
16. S-Video Output Jack  
Figure1  
17. DC In/Out 12V Power Supply Connector  
18. DC In/Out 12V Power Supply Connector  
19. TV-RF Input Jack  
4
17  
 
b. Select TV System using the UP/DOWN buttons, then press ENTER  
to enter the submenu. Select the TV System you desire using the UP/  
DOWN buttons, then press ENTER to confirm the setting.  
E. Remote Control View (Refer to Figure 2)  
Language  
Video  
Audio  
Rating  
1) MODE Button  
TV Shape  
Wide  
2) POWER Button  
3) MENU Button  
4) UP/DOWN/  
TV System  
NTSC  
NTSC  
PAL  
Auto  
LEFT/RIGHT Button  
5) ENTER/PLAY Button  
6) VOLUME +/- Buttons  
Enter  
/Add  
TV System Display  
3) Select AUDIO using the LEFT/RIGHT buttons, press ENTER to enter  
the AUDIO setup page.  
7) NUMERIC KEYPAD  
8) 10+ Button  
9) TITLE Button  
/CH+  
/CH-  
10) AUDIO Button  
11) REPEAT Button  
Language  
Video  
Audio  
Rating  
Digital out  
Lpcm 48k DS  
RAW  
Off  
Off  
On  
12) SUBTITLE Button  
13) DISPLAY Button  
14) EJECT Button  
15) SETUP Button  
16) PAUSE/Step Button  
17) STOP/Memory Button  
18) NEXT/Channel Up Button  
19) PREVIOUS/Channel Down Button  
20) SCAN FORWARD Button  
21) SCAN REVERSE Button  
22) MUTE Button  
AUDIO Display Menu  
a. Select Digital out using the UP/DOWN buttons, then press ENTER to  
enter the submenu. Select the digital output you desire using the UP /  
DOWN buttons, then press ENTER to confirm the setting.  
Language  
Video  
Audio  
Rating  
Figure 2  
23) GOTO Button  
24) ZOOM Button  
25) A-B REPEAT Button  
26) ANGLE Button  
27) SLOW Button  
Digital out  
Lpcm 48k DS  
RAW  
Off  
PCM  
RAW  
AC3 Display Menu  
16  
5
 
F. Connections  
2) Select Video by using the LEFT/RIGHT buttons, press ENTER  
to enter the Video set up page.  
White Audio In  
Red Audio In  
Language  
Video  
Audio  
Rating  
Yellow Video In  
12DC  
IN/OUT  
Remote control  
receiver  
TV Shape  
Wide  
Normal/PS  
Normal/LB  
Wide  
TV System  
NTSC  
S-video out  
Digital Out  
Video Display  
TV ANTENNA  
a. Select TV Shape using the UP / DOWN buttons, then press  
ENTER to enter the submenu. Select the TV shape you desire  
using the UP/DOWN buttons, then press ENTER to confirm the  
setting.  
Yellow Video out  
Red Audio out  
(GND)Black  
(ACC+)Red  
White Audio out  
Language  
Video  
Audio  
Rating  
TV Shape  
Wide  
Normal/PS  
Normal/LB  
Wide  
Figure 3  
1. Powering your DVD Player ( Refer to Figure 3)  
TV System  
NTSC  
Connect the black wire (-) to the vehicle ground. Connect the red  
wire (+) to a switched (Accessory) 12VDC source. Plug the other  
end into the 12VDC input jack on the back of the unit.  
2. Remote IR Receiver ( Refer to Figure 3)  
Plug the 1/8 plug on the remote IR cable into the IR IN jack on  
the back of the DVD player. Place the IR receiver anywhere in the  
vehicle to allow remote control from any location.  
3. Connecting to a Monitor  
TV Shape Display  
* Normal/PS: When the player is connected to a normal TV, and a  
wide picture is shown on the full screen.  
a. Match the color - coded plugs to the A/V OUTPUT jacks on the  
back of the DVD Player A/V OUTPUT jacks: Yellow (video) to  
Yellow, White (left audio) to White, and Red (right audio) to Red.  
4. Connecting an External Video Source  
* Normal/LB: When the player is connected to a normal TV, and a  
wide picture is shown on the screen with a black strip at both the  
top and bottom of the screen.  
* Wide: When the player is connected to a wide screen TV, a wide  
picture is shown on the full screen.  
To connect a video game or another audio/video source, plug the  
A/V cable into either the A/V input jacks on the front or rear of the  
DVD player.  
6
15  
 
b. Select Subtitle using the UP/DOWN buttons, then press ENTER  
to enter the submenu. Select the Subtitle language you desire  
using the UP/DOWN buttons, then press ENTER to confirm the  
setting.  
G. Playing  
After connecting power to the unit, press the power button on the main unit  
momentarily. Insert the disc into the slot on the front of the unit, the unit will  
load the disc and start playing automatically: If there is a disc inside the unit,  
press the POWER button, the unit will start playing automatically.  
Language  
Video  
Audio  
Rating  
1. BASIC OPERATION  
OSD Menu  
Subtitle  
Audio  
English  
English  
English  
English  
English  
Chinese  
French  
Spanish  
German  
Dutch  
Turn the unit on/off  
Eject/load the disc  
POWER  
EJECT  
PLAY  
DVD Menu  
Start Play/Execute item or setting  
Play at 1/2, 1/4, 1/6 or 1/7 times speed  
Still Picture  
(1 time) Stop at the present playing point /  
(2 times) Stop playing  
Go to the next chapter, track or scene during  
play back  
Go back to the preceding chapter, track or  
scene during play back  
Scan forward at 2, 4, 8 or 20 times normal  
speed  
Scan backward at 2, 4, 8 or 20 times normal  
speed  
Used for Menu Navigation  
Execute item or setting  
Select item or setting  
Auto  
Off  
SLOW  
PAUSE  
STOP  
Subtitle Display  
c. Select Audio using the UP/DOWN buttons, then press ENTER  
to enter the submenu. Select the audio language you desire using  
the UP/DOWN buttons, then press ENTER to confirm the setting.  
NEXT  
PREVIOUS  
Language  
Video  
Audio  
Rating  
FAST FORWARD  
FAST REVERSE  
OSD Menu  
Subtitle  
Audio  
English  
English  
English  
English  
English  
Chinese  
French  
Spanish  
German  
Dutch  
DVD Menu  
UP/DOWN/LEFT/RIGHT  
ENTER  
NUMBERS  
RETURN  
MENU  
Return  
Display the root menu of the disc  
Repeat playing title, chapter, or track  
Display information (title, chapter, track, time,  
etc.).  
Change the angles of a scene  
Select the subtitle language  
Select the audio language  
Enlarge an image to 2, 3, or 4 times the  
original  
Audio Display  
REPEAT  
DISPLAY  
d. Select DVD Menu using the UP/DOWN buttons, then press ENTER  
to enter the submenu. Select the DISC Menu language you desire  
using the UP/DOWN buttons, then press ENTER to confirm the  
setting.  
ANGLE  
SUBTITLE  
AUDIO  
Language  
Video  
Audio  
Rating  
ZOOM  
OSD Menu  
Subtitle  
Audio  
English  
English  
English  
English  
English  
Chinese  
French  
Spanish  
German  
Dutch  
For DVD playback Setup press stop and then  
press Setup to select and set items, and exit  
the setup menu.  
SETUP  
DVD Menu  
DVD Menu Display  
14  
7
 
12. SETUP  
2. MENU  
Press SETUP to display the Main screen of the SETUP Menu on  
the screen. Press SETUP again to exit the SETUP Menu and the  
unit will resume last playback mode.  
A DVD is divided into sections called titles and chapters. When you play  
a DVD, a root menu of the disc will appear on the screen of your TV or  
Monitor. Contents of the menu will vary depending on the disc content.  
Press MENU during playback to display the main menu. Some DVDs  
only allow you to select disc playback options using the DVD root menu.  
3. DISPLAY  
Language  
Video  
Audio  
Rating  
1) Display mode  
During playback press DISPLAY once to display items 5, and 7. Press  
DISPLAY twice to display the current disc playback information. Press  
display again to remove the display.  
1
2 3  
4
5
6
7
Main SETUP Menu Screen  
1) Select language using the LEFT/RIGHT buttons, press ENTER to  
enter the LANGUAGE setup page.  
DVD  
00:00:35 00:03:53  
1 / 1  
8
9
Title 1/1  
Audio  
Subtitle  
Chapter 1 / 8 Angle  
10  
1/2  
1/2 CHI  
6Ch ENG  
Language  
Video  
Audio  
Rating  
11  
12  
Bitrate 8.448 Mbps  
OSD Menu  
Subtitle  
Audio  
English  
English  
English  
English  
English  
Francais  
Espa~nol  
DVD Menu  
Deutsch  
17  
13 14  
15  
16  
Nederlands  
Display Mode  
Language Display Menu  
a. Select OSD Menu using the UP/DOWN buttons, then press  
ENTER to enter the submenu. Select the OSD language you desire  
using the UP/DOWN buttons, then press ENTER to confirm the  
setting.  
1. The type of disc.  
11. The number of total audio  
languages.  
2. The number of current title.  
3. The number of total titles.  
4. The number of current chapter.  
5. The elapsed time of title.  
6. The number of total chapters.  
7. The remaining time of title.  
12. The number of current subtitle  
language.  
Language  
Video  
Audio  
Rating  
13. The number of total subtitle  
languages.  
14. Current subtitle language.  
OSD Menu  
Subtitle  
Audio  
English  
English  
English  
English  
English  
Francais  
Espa~nol  
8. The number of the current angle. 15. Dolby audio mode.  
DVD Menu  
Deutsch  
9. The number of total angles.  
10. The number of the current audio 17. Current Bitrate  
language.  
16. Current audio language selected.  
Nederlands  
OSD Display Menu  
8
13  
 
USING THE REPEAT FEATURE  
The default mode for the Repeat feature is OFF. Pressing REPEAT  
consecutively changes the repeat options:  
4) ANGLE  
During playback press ANGLE to change the current angle of discs  
containing multi-angles. (You can see item 8 in the display change) If  
the disc has only one angle, you will see on the screen when pressing  
ANGLE indicating that no other angles are available.  
5) SUBTITLE  
Repeat Single (repeat playback of a song)  
Repeat All (repeat playback of the entire folder)  
Off (normal playback)  
During disc playback press SUBTITLE* to select the desired subtitle  
language. (You can see item 14 change)  
Pressing REPEAT a 3rd time will resume normal playback. As you toggle  
through the options, the repeat option changes. Selected repeat option  
loops repeatedly until you turn it off.  
6) AUDIO  
During disc playback press AUDIO* to select the desired audio language.  
(You can see item 10 in Picture 1 change) *NOTE: Some DVD's only  
allow access to these functions through the DVD menu.  
7) ZOOM  
NOTICE  
DVD  
00:00:35 00:03:53  
Title 1/1  
Audio  
Subtitle  
Chapter 1 / 8 Angle  
1/2  
1/2 CHI  
1 / 1  
6Ch ENG  
Sign in front of a file name indicates that this is a folder, not  
a Mp3 file.  
Bitrate 8.448 Mbps  
Mp3  
Sign in front of a file name indicates that this is a MP3 file.  
During MP3 playback, you cannot access ' PLAY MODE ', folders  
or songs.  
2
Zoom in Display Mode  
11. Playing a JPEG file  
1) Insert the JPEG Disc into tray.  
2
2) You can preview the JPEG file by pressing the MENU Button.  
3) Press PLAY to playback the JPEGs in order.  
4) Press PAUSE to STOP on a picture.  
Zoom Display  
During playback press ' ZOOM ' to enlarge the picture by 1x, 2x or 3X  
with the current zoom multiple displayed.  
DVD  
00:00:35 00:03:53  
1 / 1  
8) REPEAT  
Title 1/1  
Audio  
Subtitle  
Chapter 1 / 8 Angle  
1/2  
1/2 CHI  
6Ch ENG  
Bitrate 8.448 Mbps  
Repeat Chapter  
12  
9
 
As you toggle through the options, the repeat option changes. The selected  
repeat option loops repeatedly until its turned off.  
10. PLAYING MP3 DISCS  
Repeat Chapter  
MP3 is a digital audio format. An audio CD-quality song is compressed  
into the MP3 format with no significant loss of audio quality. CD-R /RW  
discs that have been encoded in MP3 format are compatible with this  
device.  
Repeat Display  
Insert an MP3 Disc, the DVD player will initialize the disc and the  
directory (folder) will be shown on the monitor screen.  
During playback press Repeat once to repeatedly play the current  
chapter, press a 2nd time to repeat the current title, press a 3rd time and  
the repeat function is cancelled and normal playback resumes. Repeat  
mode sequence : Repeat Chapter/Repeat Title/Off.  
CD-R  
MENU  
ROOT  
0
--  
9. PLAYING AUDIO CDS  
Track 01  
Track 02  
Track 03  
Track 04  
Track 05  
Track 06  
--  
When playing an audio CD the display will automatically display the disc  
playback information. The options below show you what information is  
displayed. Press the DISPLAY button to remove the display.  
1. The current track.  
2. The number of total tracks.  
3. Playing time of the disc.  
4. Remaining time of the disc.  
Mode Folder Normal  
MENU Screen Display  
CD  
Track 1 / 18  
00:01:58  
01:12:54  
When an MP3 disc is inserted into the unit, the menu screen appears  
automatically. You can use the menu screen to change folders and songs.  
The system plays the songs in the order they were recorded onto the disc.  
1
2
3
4
1. Press the  
the left side of the screen.  
or  
button to choose a folder from the folder list on  
Display in Playing CD  
USING THE REPEAT FEATURE  
2. Press ENTER to select the highlighted folder. All songs available  
under the selected folder will be listed.  
3. Use  
or  
ENTER to play the selected song.  
button to choose a song from the list then press  
The default mode for the Repeat feature is OFF. Pressing REPEAT  
consecutively changes the repeat options:  
Repeat Single- repeats the track that is playing.  
Repeat All- repeats the disc that is playing.  
Off  
Use the ( NEXT )button to move to the next song. Press the  
(PREVIOUS) button to move to the beginning of the song.  
10  
11  
 

3Com Network Router WL 542 User Manual
3Com Switch 3C16491 User Manual
Aastra Telecom IP Phone SIP9133i User Manual
Acer Computer Monitor X203H User Manual
Acnodes Computer Monitor PMW6190 User Manual
AKG Acoustics Microphone HT 470 User Manual
AKG Acoustics Satellite Radio GB 40 User Manual
Alpine Headphones eX 10 User Manual
Amana Refrigerator XRSR687BW User Manual
American Audio Turntable TTB 2010 User Manual