Audiovox Car Stereo System AVD300T User Manual

AVD300T  
SLOT-IN DVD PLAYER WITH BUILT-IN TV TUNER  
Owner’s Manual  
 
SAFETY PRECAUTION  
For safety reasons do not allow children to unfasten seat-belts to change  
video media or make any adjustments to the system. Enjoy your enter-  
tainment system but always remember the safety of all passengers is  
the number one priority.  
IMPORTANT NOTICE  
It is unlawful in most states for a person to drive a motor vehicle which is  
equipped with a television viewer or screen that is located in the motor  
vehicle at any point forward of the back of the driver’s seat, or that is  
visible, directly or indirectly, to the driver while operating the vehicle. In  
the interest of safety, this system should never be installed where it will  
be visible, directly or indirectly, by the operator of the motor vehicle.  
1. OBJECT AND LIQUID  
Do not insert objects of any kind into the system through its open-  
ings; do not spill or spray liquid on or into the system (this may  
result in a fire or electric shock). Do not place heavy objects on the  
unit. To ensure proper ventilation and proper operation, never cover  
or block the slots and openings.  
2. DISASSEMBLE  
Do not attempt to disassemble the unit. There is a risk of electric  
shock and/or exposure to Laser Radiation. Contact qualified ser-  
vice personnel if your system is in need of repair.  
3. CLEANING UNIT  
When cleaning, make sure the system is unplugged from the power  
source. Do not use any solvents or cleaning solutions. Clean the  
DVD player using a lightly dampened lint free cloth to wipe the unit.  
3
 
4. DISC  
Do not use irregularly shaped discs such as heart or star-shaped  
discs as they may cause the unit to malfunction. Do not stick pa-  
per, tape or glue on the disc. Do not expose the disc to direct sun-  
light or heat sources. Do not touch the surface of the disc. Handle  
the disc by its edges. Clean the disc by wiping the disc from the  
center out with a soft lint free cleaning cloth. Remove the disc from  
the unit and store it in its case after playing. Some playback opera-  
tions of discs may be intentionally fixed by software producers.  
The unit plays discs according to the disc contents the software  
producers designed therefore some playback features may not be  
available. Refer to the instructions supplied with the discs.  
5. Powering the DVD Player  
This system MUST be powered from a switched (Accessory)  
power source as indicated on the marking label. Power should be  
applied to the unit when the ignition key is in the run and/or acces-  
sory positions. Use only the supplied power cable provided with  
this set to avoid electric hazards.  
6. Operation  
When the temperature rises dramatically from a very low tempera-  
ture, moisture may condense inside theAVD300T and cause the  
DVD player to malfunction. If theAVD300T does not operate prop-  
erly under these conditions leave theAVD300T turned on for at least  
30 minutes for the moisture to evaporate.  
4
 
C. Contents  
1. Main Unit  
2. Remote control with two AAA Batteries  
3. Power Cable  
4. Two (2) Brackets with four (4) Screws  
5. Owner's Manual  
6. PowerAdaptor* (4-Pin to 2-Pin) Cable  
7. DVRCA*Adaptor for connection to a second monitor  
8. RCA Cables ( Red, Yellow, and White)  
9. Remote IR Receiver  
* For use with 8010730 Accessory Cable  
D. Controls  
Main Unit (Refer to Figure 1)  
1. Power Button  
2. Menu Button  
3. Previous Button  
4. Play & Up, Down,  
Left, Right Button  
5. Next Button  
6. Stop Button  
7. Video Input Jack  
8.Audio LInput Jack  
9.Audio R Input Jack  
10. Eject Button  
11. Remote Control Sensor  
12. DC 12V Power Supply Input  
13. IR Input  
Figure1  
14.Antenna Input  
15. Monitor Output Port 1  
16. Monitor Ouptut Port 2  
17. Video Output Jack  
18.Audio LOutput Jack  
19.Audio R Output Jack  
5
 
E. Remote Control View (Refer to Figure 2)  
1) DVD/TV/AUX Button  
2) Power Button  
3) Display Button  
4)Angle Button  
5) Subtitle Button  
6) Repeat Button  
7)A-B Repeat Button  
8) Menu Button  
9) Slow Button  
10) Pause Button  
11) Forward Scan Button  
12) Reverse Scan Button  
13) Skip+ Button  
14) Skip- Button  
15)Auto memory Button  
16) Channel Up Button  
17) Zoom Button  
18) Eject Button  
19) Numeric Keypad  
20)Audio Button  
21) Setup Button (Next)  
22) Up/Down/Left/Right /  
Enter Buttons  
Figure 2  
23) Return Button  
24) Stop Button  
25) Play Button  
26) Channel Down Button  
6
 
F. Connections  
Figure 3  
1. Powering Your DVD Player ( Refer to Figure 3)  
Connect the black wire (-) to the vehicle ground. Connect the red  
wire (+) to a switched (Accessory) 12VDC source. Plug the other  
end into the 12VDC input jack on the back of the unit.  
2. Remote IR Receiver ( Refer to Figure 3)  
Plug the 1/8” jack on the remote IR cable into the IR IN jack on the  
back of the DVD player. Place the IR receiver anywhere in the  
vehicle to allow remote control from any location.  
7
 
Figure 4  
3. Connecting to anAudiovox Overhead Monitor  
TheAVD300T can be connected to Audiovox Overhead monitors  
with the supplied adaptors (DVRCA and 4 pin to 2 pin power adapter)  
when using theAudiovox accessory cable (part number 8010730).  
Plug in the 3 RCA jacks, white (left audio) to white, red (right audio)  
to red, and yellow (video) to yellow. Connect the IR jacks. Connect  
the 4 pin to the 2 pin power adapter, 4 pin to the accessory cable  
and the plug into theAVD300T power jack.  
4. Connecting to a Monitor  
a. Match the color-coded plugs to the appropriate jacks on the  
back of the DVD Player A/V OUTPUT jacks: Yellow (video) to  
Yellow, White (left audio) to White, and Red (right audio) to Red.  
8
 
Figure 5  
b. Connect any of the two monitor ports on the back of the DVD  
player directly to the Movies 2 Go headrest hoods Model MMH56  
B/T/G. Power, audio, video and IR signals are supplied through  
the DIN cable.  
c. Using the supplied adapter (Part Number DVRCA) the monitor  
port can be connected to any monitor.  
5. Connecting an External Video Source  
To connect a video game or another audio/video source, plug the  
A/V output jacks into the matching color-codedA/V input jacks on  
the front of the DVD player. Press the DVD/TV/AUX button on the  
remote untilAUX is displayed on the monitor.  
G. Playing  
After connecting power to the unit, press the power button on the  
main unit momentarily. The power light will increase in brightness.  
Insert the disc into the slot on the front of the unit, the unit will load the  
disc and start playing automatically: If there’s a disc inside the unit,  
press the POWER button, the unit will start playing automatically.  
9
 
1. Basic Operation  
POWER  
Turn the unit on/off  
EJECT  
PLAY  
Eject the disc  
Start Play  
SLOW  
PAUSE  
STOP  
Play at 1/2, 1/4, 1/8 or 1/16 times speed  
Still Picture  
(1 time) Stop at the present playing point /  
(2 times) Stop playing  
NEXT  
Go to the next chapter, track or scene dur-  
ing play back  
PREVIOUS  
FORWARD  
REVERSE  
Go back to the preceding chapter, track or  
scene during play back  
Scan forward at 2, 4, 8, 16, or 32 times nor-  
mal speed  
Scan backward at 2, 4, 8, 16, or 32 times  
normal speed  
UP/DOWN/LEFT/RIGHT Used for Menu Navigation  
ENTER  
NUMBERS  
RETURN  
MENU  
REPEAT  
A-B  
Execute item or setting  
Select item, setting, or TV channel  
Return  
Display the root menu of the disc  
Repeat playing title, chapter, or track  
Repeat a specific portion from pointAto point  
B of the disc  
DISPLAY  
Display information (title, chapter, track,  
time, etc.).  
ANGLE  
SUBTITLE  
AUDIO  
Change the angles on the scene  
Select the subtitle language  
Select the audio language  
Enlarge an image to 2, 3, or 4 times the  
original  
ZOOM  
SETUP  
Display the setup menu to select and set  
items, and exit the setup menu.  
Change sources (DVD, TV and AUX)  
Search channels and store them automati-  
cally  
DVD/TV/AUX  
AUTO MEMORY  
CHANNEL UP  
Choose the next channel  
CHANNEL DOWN  
Choose the previous channel  
10  
 
2. MENU  
A DVD is divided into sections called titles and chapters. When you  
play a DVD, a root menu of the disc will appear on the screen of your  
TV or Monitor. Contents of the menu will vary depending on the disc  
content. Press MENU during playback to display the root menu. Some  
DVDs only allow you to select disc playback options using the DVD  
root menu.  
3. DISPLAY  
1). PLAYING TIME AND REMAINING TIME  
a. During playback press the ‘DISPLAY’ button to display the cur-  
rent Title Number (1), the total Number of Titles (2), the current  
Chapter Number (3), the total Number of Chapters (4), and the  
elapsed Time for the title (5). The heading will disappear auto-  
matically after 3 seconds if no other buttons are pressed.  
Title, Chapter Number, and Time Screen Display  
b. Press ‘DISPLAYagain to display the Remaining Time of the title.  
The heading will disappear automatically in 3 seconds.  
Title Remaining Time Screen Display  
11  
 
c. Press ‘DISPLAY’ a 3rd time to display the Elapsed Time for the  
chapter. The heading will disappear automatically in 3 seconds.  
Chapter Elapsed Time Screen Display  
d. Press ‘DISPLAYa 4th time to display the Remaining Time for the  
chapter. The heading will disappear automatically in 3 seconds.  
Chapter Remaining Time Screen Display  
e. Press ‘DISPLAY’ a 5th time to exit, ‘DISPLAY OFF’ will be dis-  
played and will disappear automatically in 3 seconds.  
2). ANGLE  
During playback of a disc, press ‘ANGLE’ to display the number  
of the available angles for discs containing multi-angles*, with the  
current angle number (1) and the total number of angles (2).  
Press ‘ANGLE’ to select another angle, then press again to exit  
and return to the normal viewing angle. The angle display will  
disappear automatically if the ‘ANGLE’ button is not pressed again  
within 3 seconds.  
*NOTE: Not all discs contain this feature.  
12  
 
Angle Screen Display  
3). SUBTITLE  
During disc playback press ‘SUBTITLE’ to select the desired sub-  
title language* current Subtitle Language Number (1) and the total  
Number of Subtitle Languages (2) will be displayed. If there are  
multiple languages press ‘SUBTITLE’ again to select another sub-  
title language. To turn subtitles OFF, press the ‘SUBTITLE’ button  
until ‘SUBTITLE OFF’ is displayed. The Subtitle display will disap-  
pear automatically if the ‘SUBTITLE’ button is not pressed again  
within 3 seconds.  
Subtitle Screen Display  
* Some DVDs only allow access to this function through the DVD  
menu.  
13  
 
4). AUDIO  
During playback press ‘AUDIO’ to select the desired audio lan-  
guage * current Audio Channel Number (1) and the total number  
of Audio Channels (2) will be displayed. Press AUDIO again to  
select another audio language. The audio display will disappear  
automatically if the ‘AUDIO’ button is not pressed within for 3  
seconds.  
Audio Language Screen Display  
* Some DVDs will only allow access to this function through the  
DVD menu.  
5). ZOOM  
During playback press ‘ZOOM’ to enlarge the picture by 2x, 3x or 4X  
with the current zoom multiple displayed. Press “zoom” once, the  
picture will be enlarged 2X. Press “zoom a ”second time ,the pic-  
ture will be enlarged 3X. Press “zoom a ”3rd time ,the picture will be  
enlarged 4X. Press “zoom”4th time, the picture will return to normal  
size.  
ZOOM Screen Display  
14  
 
6). A-B REPEAT  
a. During playback press ‘A-B’ to set the Starting Point A.  
A-B Repeat Starting Point Screen Display  
b. Press ‘A-B’ a second time to set the Ending Point B and the  
player will repeatedly play the part between Point A and Point B.  
A-B Repeat Ending Point Screen Display  
c. Press ‘A-B’ a third time to cancel A-B repeat and resume  
normal playback.  
15  
 
7). REPEAT  
a. During playback press ‘REPEATonce to repeatedly play the cur-  
rent chapter.  
Chapter Repeat ON Screen Display  
b.During playback press ‘REPEAT’ again to repeatedly play the  
current title.  
Title Repeat ON Screen Display  
c. During playback press ‘REPEATa 3rd time to repeat all Chapters  
and Titles.  
All Repeat ON Screen Display  
16  
 
d. Press “REPEAT” a 4th time, to resume normal play.  
Repeat Off Screen Display  
4. PLAYING AUDIO CDS  
When playing an audio CD press the DISPLAY button on the remote  
to view time information. The options below show you what information  
is available using this function.  
1). The current track and playing time of that track will be displayed on  
the screen.  
SINGLE ELAPSED Screen Display  
2).Press ‘DISPLAYone time and SINGLE REMAIN appears along with  
the current track playing and the amount of time left in that track.  
SINGLE REMAIN Screen Display  
17  
 
3).Press ‘DISPLAY’ twice and TOTAL ELAPSED appears along with  
the current track playing and the total time that the CD has been  
playing.  
TOTAL ELAPSED Screen Display  
4).Press ‘DISPLAY’ three times and TOTAL REMAIN appears along  
with the current track playing and the amount of time remaining on  
the CD.  
TOTAL REMAIN Screen Display  
5).Press ‘DISPLAY’ four times and DISPLAYOFF will appear momentarily  
then disappear. The disc time Information will no longer be displayed.  
USING THE REPEAT FEATURE  
The default mode for the Repeat feature is OFF. Pressing REPEAT  
consecutively changes the repeat options:  
TRACK- repeats the track that is playing.  
ALL- repeats the disc that is playing.  
OFF  
As you toggle through the options, the repeat option changes. The  
selected repeat option loops repeatedly until its turned off.  
18  
 
5. PLAYING MP3 DISCS  
MP3 is a digital audio format. An audio CD-quality song is  
compressed into the MP3 format with no significant loss of audio  
quality. CD-R /RW discs that have been encoded in MP3 format are  
compatible with this device.  
InsertanMP3 and theDVD playerwillinitializethediscandthedirectory  
(folder) will be shown on the TV screen.  
MENU Screen Display  
When an MP3 disc is inserted into the unit, the menu screen appears  
automatically. You can use the menu screen to change folders and  
songs. The system plays the songs in the order they were burned  
onto the disc.  
1. Press the  
or button to choose a folder from the folder list  
on the left side of the screen.  
2. Press ENTER to select the highlighted folder. All songs avail-  
able under the selected folder will be listed.  
3. Use  
or button to choose a song from the list then press  
PLAY to play the selected song.  
19  
 
Use the  
( NEXT ) button to move to the next song. Press the  
(PREVIOUS) button to move to the beginning of the song.  
USING THE REPEAT FEATURE  
The default mode for the Repeat feature is OFF. Pressing REPEAT  
consecutively changes the repeat options:  
• RANDOM(random play)  
• SINGLE(play single song only)  
• REPEAT ONE(repeat playback of a song)  
• REPEAT FOLDER(repeat playback of a specific folder)  
• FOLDER (normal playback)  
Press REPEATuntil folder is displayed and the unit will resume normal  
playback. Asyoutogglethroughtheoptions, therepeatoptionchanges.  
Selected repeat option loops repeatedly until you turn it off.  
NOTICE  
“ ” icon in front of a file name indicates that this is a folder, not a MP3  
file.  
“ ” icon in front of a file name indicates that this is a MP3 file. During  
MP3 playback, you cannot access “PLAYMODE”, folders or songs.  
20  
 
6. Playing JPEG file  
1) Insert the JPEG Disc into tray.  
2) Select JPEG file by pressing “UP/DOWN” button.  
3) You can preview the JPEG file by pressing “Play” or “ENTER”.  
4) Pressing the left or right button will rotate the JPEG in that direction.  
5) When browsing the photos, you can reverse the photo horizontally  
by pressing “Up” key,or you can reverse the photos vertically by  
pressing “Down” key.  
6) When you browse the JPEG file, press “display”, there will be  
different refresh mode below.  
a. Press “display” first time, “WIPE TOP” display on the screen, the  
picture will refresh from top to bottom.  
b. Press “display” 2nd time, “WIPE BOTTOM” will display on the  
screen, the picture will refresh from bottom to top.  
c. Press “display” 3rd time, “WIPE LEFT” will display on the screen,  
the picture will refresh from left side to right side.  
d. Press “display” 4th time, “WIPE RIGHT” will display on the screen,  
the picture will refresh from right side to left side.  
e. Press “display” 5th time, “DIAGONAL WIPE LEFT TOP” will dis-  
play on the screen, the picture will refresh from left top to right  
bottom.  
f. Press “ display ” 6th time, “DIAGONAL WIPE RIGHT TOP” will  
display on the screen, the picture will refresh from right top to left  
bottom.  
g. Press “display” 7th time, “DIAGONAL WIPE LEFT BOTTOM” will  
display on the screen, the picture will refresh from left bottom to  
right top.  
h. Press “display ” 8th time, “DIAGONAL WIPE RIGHT BOTTOM”  
will display on the screen, the picture will refresh from right bot-  
tom to left top.  
i. Press “display” 9th time, “EXTEND FROM CENTER H” will dis-  
play on the screen, the picture will refresh from horizontal center  
to both sides.  
j. Press “display” 10th time, “EXTEND FROM CENTER V” will  
display on the screen, the picture will refresh from vertical cen-  
ter to both sides.  
21  
 
k. Press “display” 11th time, “COMPRESS TO CENTER H” will  
display on the screen, the picture will refresh from top and bot-  
tom to center.  
l. Press “display” 12th time, “COMPRESS TO CENTER V” will  
display on the screen, the picture will refresh from right and left  
to center.  
m.Press “display” 13th time, “WINDOW H” will display on the  
screen, the picture will refresh from four window’s top side to  
bottom side.  
n. Press “display” 14th time, “WINDOW V” will display on the screen,  
the picture will refresh from four window’s left side to right side.  
o. Press “display” 15th time, “WIPE FROM EDGE TO CENTER”  
will display on the screen, the picture will refresh from 4 edges to  
center.  
p.Press “ display”16th time, “MOVE IN FROM TOP”will display on  
the screen,the picture will refresh slower than normal.  
7) Press “Stop” to browse the JPG file, “SLIDE SHOW” “MENU” will  
display on the screen.  
8) When browsing the picture, press “Stop” and thumbnail size picture  
will be diplayed. You can select the desired picture by using the  
UP/DOWN/LEFT/RIGHT/ENTER keys.  
9) Press “Play” or “ENTER”, to preview a picture.  
10) You can return the root Menu by pressing “MENU” key.  
22  
 
7. SETUP  
Press ‘SETUP’ to display the Main screen of the SETUP Menu on the  
screen. Press ‘SETUP’ again to exit the SETUP Menu and the unit  
will resume it’s last playback mode.  
Figure 31. Main SETUP Menu Screen  
1) Press “Setup”, the ‘GENERAL SETUP’ will display on screen.  
a. Select TV DISPLAY using UP/DOWN, and then press RIGHT  
to enter the submenu. Select the TV display mode on the screen  
using UP/DOWN, and press ENTER to confirm the setting. Press  
LEFT to return.  
Figure 32. TV DISPLAY Screen Display  
* NORMAL/PS: When the player is connected to a normal TV,  
and a wide picture is shown on the full screen.  
* NORMAL/LB: When the player is connected to a normal TV,  
and a wide picture is shown on the screen with a black strip  
at both the top and bottom of the screen.  
* WIDE: When the player is connected to a wide screen TV, a  
wide picture is shown on the full screen.  
23  
 
b. Select ‘TV Type’ using UP/DOWN, and then press the RIGHT  
button to enter the submenu. Choose TV Type using UP/DOWN  
and then press ENTER to confirm the setting. Press the LEFT  
button to return.  
Figure 33. TV Type Screen Display  
c. Select ‘ANGLE MARK’ using UP/DOWN, and then press the  
RIGHT button to enter the submenu. Choose Angle Mark on or  
off displayed on the screen using the UP/DOWN and then press  
ENTER to confirm the setting. Press the LEFT button to return.  
Figure 34. ANGLE MARK Screen Display  
* ON: The screen will show angle mark.  
(*If angle option is available).  
OFF: The screen will not display the Angle Mark  
24  
 
2) When no disc inside the player, select “password” using LEFT/  
RIGHT, then press ENTER. Press right to enter the submenu .  
Figure 42. PASSWORD CHANGE Menu  
Press ‘ENTER’ to enter the Password Change Page. Input the Old  
Password or the Default Password, the New Password, and the  
Confirmed New Password. Press ‘ENTER’ to confirm the change.  
NOTE: For 1st time use the default password is 3308.  
Figure 43. PASSWORD VERIFY Input Screen Display  
NOTE: The Default Password is 3308. This password is always  
effective even after you have selected your own password and  
changed it. To avoid the possibility of others using the default  
password to set the parental level and change the password, you  
can record this default password in another area and delete it  
from this manual. Some discs can be limited depending on the  
age of users while some discs can not.  
25  
 
3) When no disc inside the player select “Preference Page” by using  
LEFT/RIGHT, press ENTER to enter the Preference page.  
Figure 36. Preference Page Menu Screen  
a. Select “Audio” using the UP/DOWN buttons, then press right to  
enter the submenu. You can change the Audio Language by  
pressing UP/DOWN buttons. After chosing the proper Audio Lan-  
guage, press ENTER or LEFT back to return to the root menu.  
Figure 37. Preference Audio Language  
b. Select “Subtitle” using the UP/DOWN buttons, then press right  
to enter the submenu. You can change the Subtitle by pressing  
the UP/DOWNbuttons.  
Figure 38. Preference Subtitle Language  
After choosing the proper “Subtitle” Setting, press Enter or LEFT  
to return to the root Menu.  
26  
 
c. Select “Disc Menu” by using the UP/DOWN buttons, then press  
right to enter the submenu. You can change the Disc Menu Lan-  
guage using the UP/DOWN buttons.  
Figure 39. Preference Disc Menu Language  
After choosing the proper “Disc Menu” Setting, press Enter or  
LEFT return the root Menu.  
d. Select “Parental” using the UP/DOWN buttons, then press right  
to enter the submenu. You can change the Parental Rating using  
the UP/DOWN buttons.  
Figure 40. Parental Preference Screen Display  
After choosing the “Parental” Setting, press Enter or LEFT to  
return to the root Menu  
e. Select ‘DEFAULTS’ using the UP/DOWN buttons, then press  
RIGHT to enter the submenu. Press ENTER to make the setting  
return to the factory-set mode.  
NOTE: The parental setting is not affected by the default  
function.  
Figure 41. Loading Factory Setting  
27  
 
H. Watching TV  
1.With power applied to the system, select the TV mode by pressing  
the DVD/TV/AUX button on the remote control.  
2.PressAUTO MEMORY on the remote control to automatically  
search and store active channels The unit will start to play the first  
channel automatically.  
3. Press CHANNEL UP/DOWN or the number buttons to get to your  
desired TV channels.  
I. Specification  
Supported media  
DVD / CD / MP3/JPEG  
NTSC/PAL  
NTSC  
Horizontal 720 pixel,  
vertical 480 pixel  
Signal format system  
Recievable TV signal format system  
DVD Video format  
Video output  
1.0 Vp-p/75 Ohm  
Audio output  
1.2 V to 1.8 V  
Signal-to-noise ratio  
Harmonic distortion  
Dynamic range  
Wow and flutter  
Power source  
More than 60 dB  
Less than 60 dB  
More than 70 dB  
Beyond measurable Limits  
DC 12 V  
Power consumption  
Less than 1W in stand-by mode;  
and less than 12W in use  
0°C (32°F) to +40°C (104°F)  
-20°C (-4°F) to +60°C (140°F)  
5% to 95%  
Operating temperature  
Storage temperature  
Operating humidity  
Dimensions (W x H x D)  
7.45 x 6.70 x 2.05 inches  
(189 x 170 x 52 mm)  
2.4 lbs (1.1 kg)  
Weight  
28  
 
90 DAY LIMITED WARRANTY  
Applies to Audiovox Video Products  
AUDIOVOX ELECTRONICS CORP. (the Company) warrants to the original retail purchaser of  
this product that should this product or any part thereof, under normal use and conditions, be  
proven defective in material or workmanship within 90 days from the date of original pur-  
chase, such defect(s) will be repaired or replaced with reconditioned product (at the Company’s  
option) without charge for parts and repair labor.  
To obtain repair or replacement within the terms of this Warranty, the product is to be deliv-  
ered with proof of warranty coverage (e.g. dated bill of sale), specification of defect(s),  
transportation prepaid, to the Company at the address shown below.  
This Warranty does not extend to the elimination of externally generated static or noise, to  
correction of antenna problems, to costs incurred for installation, removal or reinstallation of  
the product, or to damage to tapes, discs, speakers, accessories, or electrical systems.  
This Warranty does not apply to any product or part thereof which, in the opinion of the  
Company, has suffered or been damaged through alteration, improper installation, mishan-  
dling, misuse, neglect, accident,  
or by removal or defacement of the factory serial number/bar code label(s). THE EXTENT OF  
THE COMPANY’S LIABILITY UNDER THIS WARRANTY IS LIMITED TO THE REPAIR OR RE-  
PLACEMENT  
PROVIDED ABOVE AND, IN NO EVENT, SHALL THE COMPANY’S LIABILITY EXCEED THE  
PURCHASE PRICE PAID BYPURCHASER FORTHE PRODUCT.  
This Warranty is in lieu of all other express warranties or liabilities. ANY IMPLIED WARRAN-  
TIES, INCLUDINGANY IMPLIED WARRANTY OF MERCHANTABILITY, SHALLBE LIMITED TO  
THE DURATION OF THIS WRITTEN WARRANTY.ANYACTION FOR BREACH OFANY WAR-  
RANTYHEREUNDER INCLUDINGANYIMPLIED WARRANTYOF MERCHANTABILITYMUSTBE  
BROUGHTWITHINAPERIOD OF  
15 MONTHS FROM DATE OF ORIGINALPURCHASE. IN NO CASE SHALLTHE COMPANY BE  
LIABLE FORANY CONSEQUENTIALOR INCIDENTALDAMAGES FOR BREACH OFTHIS OR  
ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. No person or representa-  
tive is authorized to assume for the Company any liability other than expressed herein in  
connection with the sale of this product.  
Some states do not allow limitations on how long an implied warranty lasts or the exclusion or  
limitation of incidental or consequential damage so the above limitations or exclusions may not  
apply to you. This Warranty gives you specific legal rights and you may also have other rights  
which vary from state to state.  
U.S.A. : AUDIOVOX ELECTRONICS CORPORATION, 150 MARCUS BLVD.,  
HAUPPAUGE, NEW YORK 11788 1-800-645-4994  
CANADA : CALL 1-800-645-4994 FOR LOCATION OF WARRANTY STATION  
SERVING YOURAREA  
128-5556C  
29  
 
128-6963  
© 2004 Audiovox Electronics Corp., 150 Marcus Blvd., Hauppauge, N.Y. 11788  
 

3M Projector MP8780 User Manual
Accusplit Fitness Electronics AL390 User Manual
AEG Range C41022G User Manual
AEG Washer 86810 User Manual
Aico Carbon Monoxide Alarm Ei261DENRC User Manual
Allied Telesis Network Router 86222 10 User Manual
Aluratek Camera Lens ADMPFB100 User Manual
American Standard Plumbing Product M968641 User Manual
AOSafety Home Safety Product Eyewear Lens User Manual
Audiovox Satellite TV System SRSIR 001FM SRSIR 001FMR User Manual