Audiovox Battery Charger CEX0122B User Manual

Battery Expansion Unit/PC CARD Expansion Unit Manual  
CEX0121B  
CEX0122B  
L Introduction  
Thank you for purchasing the Battery Expansion Unit/PC CARD Expansion Unit ("Expansion  
Unit"). This manual contains important information concerning the safe and correct use of  
your Expansion Unit. After reading this manual store it in a safe place for future reference.  
L SAFETY INSTRUCTIONS  
a Before using the Expansion Unit be sure to thoroughly read the GENIO e USER'S GUIDE to  
ensure proper use and to prevent damage to your GENIO e and/or to data.  
a Before using the Expansion Unit be sure to thoroughly read all the SAFETY INSTRUCTIONS  
contained in the GENIO e USER'S GUIDE. These SAFETY INSTRUCTIONS provide important  
information for the prevention of serious personal and damage to property.  
WARNING  
a If you smell abnormal odors, hear abnormal sounds, or see smoke coming from the Expansion  
Unit, immediately disconnect the AC Adapter from the power outlet, and stop using the Expan-  
sion Unit.  
a Never drop your Expansion Unit or subject it to severe shock. Dropping your Expansion Unit or  
subjecting it to severe shock could cause the built-in battery to leak, ignite and/or rupture.  
a Never throw your Expansion Unit into a fire or heat it.  
Throwing your Expansion Unit into a fire might cause the built-in battery to leak fluid, ignite and/  
or rupture.  
a Always immediately remove your Expansion Unit and its battery from the vicinity of any source  
of heat, such as an open flame in the event the built-in battery leaks liquid or emits an unusual  
odor. Continued use of your Expansion Unit under either of these conditions could cause  
ignition (i.e., fire) of the leaked battery liquid, or rupture.  
a Never touch any fluid that might leak from the built-in battery. Such liquid when in contact with  
the eyes or skin, could cause injury to the skin or eyes. Should the liquid come into contact  
with the eyes, irrigate the eyes thoroughly with clean water and immediately seek  
medical attention. In the event the liquid comes into contact with the skin or clothing, wash it  
away immediately with clean water.  
a Never attempt to disassemble, repair or make any modification to your Expansion Unit.  
Disassembly, modification or any attempt at repair could cause bodily injury or property  
damage, as well as damage to the Expansion Unit itself. Consult your store of purchase for  
repair.  
NOTE  
a Clean terminals (metallic parts) on a regular basis with a cotton swab. Dirty terminals could affect  
battery charging.  
a The built-in battery discharges naturally a little at a time. If leave your Expansion Unit for a long  
period of time, the built-in battery may completely discharge. Check the remaining amount of  
battery power at all times, and recharge as necessary.  
a Note that we cannot accept any responsibility whatsoever for the corruption or loss of data  
stored on your Expansion Unit caused by malfunction or repair, or discharge of the built-in  
battery.  
– 1 –  
 
a By inserting the AC Adapter into the AC Adapter Jack on the Expansion Unit.  
a By connecting the External Connection Port (concave side) on the Expansion Unit into the USB  
Cradle (GENIO e accessory), and connecting the AC Adapter into the USB Cradle.  
L
How to Confirm the Remaining Battery Power of the Expansion Unit  
Connect the Expansion Unit to the GENIO e, turn the GENIO e ON, and tap "Start" menu and then  
"Settings". On the "System" tab, tap "Power". The remaining battery power is displayed at the  
"External Battery" item on the "Battery" tab.  
L How to Connect the Expansion Unit to the GENIO e  
1. Align the protrusions on the inside of both ends of the Expansion Unit with the groove at both  
ends of the GENIO e Place the GENIO e on top of the Expansion Unit.  
2. Slide the GENIO e and insert the Cradle Connection Port on the GENIO e into the External Con-  
nection Port (convex side) on the Expansion Unit.  
a Firmly insert the port until you hear it click into place.  
The GENIO e sometimes turns ON if the PC CARD is already installed on the PC CARD  
Expansion Unit.  
a The Cradle also can be connected.  
Groove  
a Follow the above procedure in reverse to remove the Expansion Unit.  
NOTE  
a Do not connect two Expansion Units on top of each other. Doing so might cause a malfunction.  
– 3 –  
 
L How to Insert the PC CARD into the PC CARD Expansion Unit  
Gently, yet firmly, insert the PC CARD as far as possible after making sure that the PC CARD is  
correctly facing the PC CARD Slot. The slot cover is folded inside.  
a The GENIO e sometimes turns ON.  
PC CARD Slot Cover  
Top surface of card  
Eject button  
To remove the PC CARD, press the Eject button. The button will pop out. Press the button again  
until you hear a clicking sound. This will eject the PC CARD.  
a The GENIO e sometimes turns ON.  
L When Using the PC CARD Expansion Unit  
If the PC CARD is not recognized or other trouble occurs during use of the PC CARD Expansion  
Unit, follow the procedure below to remedy the problem.  
1. Remove the PC CARD Expansion Unit from the AC Adapter or the Cradle.  
2. Remove all cards from the GENIO e and the PC CARD Expansion Unit.  
3. Remove the PC CARD Expansion Unit from the GENIO e.  
a Before reconnecting the PC CARD Expansion Unit to the GENIO e, wait at least five seconds.  
4.Reset the GENIO e and wait for the “Today” screen to appear.  
L FCC information  
Product Name: Battery Expansion Unit, PC CARD Expansion Unit  
Model Number(s): CEX0121B,CEX0122B  
FCC Notice “Declaration of Conformity Information”  
This equipment has been tested and found to comply with the limits for a Class B digital device,  
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection  
against harmful interference in a residential installation. This equipment generates, uses and can  
radiate radio frequency energy and, if not installed and used in accordance with the instructions,  
may cause harmful interference to radio communications. However, there is no guarantee that inter-  
ference will not occur in a particular installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by turning the equipment off and on, the  
user is encouraged to try to correct the interference by one or more of the following measures:  
- Reorient or relocate the receiving antenna.  
- Increase the separation between the equipment and receiver.  
- Connect the equipment into an outlet on a circuit different from that to which the receiver is  
connected.  
- Consult the dealer or an experienced radio/TV technician for help.  
This device complies with part 15 of the FCC Rules. Operation is subject to the following  
two conditions:  
(1) This device may not cause harmful interference, and  
(2) this device must accept any interference received, including interference that may cause  
undesired operation.  
– 4 –  
 

Acer Computer Monitor X203W User Manual
Addlogix TV Converter Box HKDW 702 User Manual
Aiphone Conference Phone LE D User Manual
Aiphone Home Security System NDR 10A User Manual
Aiphone Indoor Furnishings N 20AS User Manual
Airlink101 Security Camera AICN747W User Manual
American Audio CD Player CDS 1 User Manual
Audiovox Automobile Alarm APS 15R User Manual
Audiovox Battery Charger AH780R User Manual
Bacharach Fitness Electronics 19 7037 User Manual