Audiovox Automobile Electronics PRO PDA15 User Manual

INSTALLATION GUIDE FOR THE:  
PRO-PDA15  
Power Door Lock Actuator  
Printed in Taiwan  
Form No. 128-6367A  
ACTUATOR/DOOR LOCK INSTALLATION  
1.) Carefully remove the door panel.  
2.) Since the adjustable steel mounting strap is optional at this step, you can either attach strap to the door structure  
(see Drawing #3) and mount actuator/door lock to the strap, or attach actuator/door lock onto the door structure.  
Both mounting methods must ensure a suitable position is selected that will not hinder the window mechanism  
and is close enough to operate the existing lock assembly.  
3.) Slide connector rod onto the end hole of actuator/door lock. Attach-connector rod clamp to the connector rod (see  
Drawing #2).  
4.) Set door lock in the unlock position, then tighten connector rod clamp to the existing factory door rod supplied  
with kit.  
5.) Pull connector rod until the actuator is fully extended, then tighten connector rod clamp to existing factory door  
rod.  
INSTALLATION DIAGRAM  
CONNECTOR  
ROD CLAMP  
CONNECTOR ROD  
HEX HEAD  
SCREWS  
 

3M Model Vehicle QC 10 User Manual
Advantech Computer Hardware AIMB 760 User Manual
Airfree Air Cleaner Enviro 60 User Manual
Altec Lansing MP3 Docking Station iMT320 User Manual
Amana Microwave Oven RCS10DA User Manual
American Audio CD Player American Audio CD MP3 Player User Manual
American Standard Plumbing Product 7415101 User Manual
Anaheimr DPJ72LC2 User Manual
AO Smith Water Heater BFC 100 User Manual
Banner Power Supply MPS 15 User Manual