On installation
FUNCTION OF CONTROLS
COMPACT DISC COMPACT PLAYER
Never install the unit where it would be subjected to :
-
-
-
-
-
-
heat sources such as radiators or airducts
direct sunlight
excessive dust
mositure or rain
mechanical vibration or shock
unleved surface
Opening the CD tray to
insert or remove a disc.
SKIP +
lightly /
Press
Operating Instructions
repeatedly :
Before operating the unit, please read this manual throughly and retain it for future reference.
To locate the beginning of
next selection / selections.
PLAY / PAUSE
Press
Press
pause.
To release pause, press
again.
to begin play.
during play to
•
•
Do not place any heavy object on top of the unit.
Keep
depressed :
When the unit is used with an AC power adaptor, do not wrap the unit in a cloth, blanket, etc. If
you do, the temperature inside and outside the unit may rise considerably, resulting in
malfunctioning of the unit or serious accident.
If the unit brought directly from a cold to warm location, or is placed in a very damp room, moisture
may condense on the lens inside the unit. Should this occur, the unit willl not operate. In this
To go ahead at high speed
(search).
WARNING : TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THE UNIT TO RAIN OR MOISTURE.
TO AVOID ELECTRICAL SHOCK, DO NOT OPEN THE
CABINET.
•
•
REPEAT / ENTER
Playing the selections in the
desired order.
case, remove the disc and leave the unit
evaporates.
a
warm place for several hours until the moisture
STOP
Press once for disc playing
stops.
Press twice for power off.
For the unit to operate at its best, it should not be subjected to temperature below 5˚C (41˚F) or
above 35˚C (95˚F).
REFER SERVICING TO QUALIFIED PERSONNEL ONLY.
PLAY MODE
Button for selecting the
various play mode.
Track search and fast
forward / fast reverse
- SKIP
Press
repeatedly :
To locate the beginning of
the current selection or
previous selections.
Notes on headphones / earphone
Do not use headphones / earphone while driving, cycling, or operating any motorized vehicle, it may
create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play your
headsets at high volume while walking, especially at pedestrian crossings. You should exercise extreme
caution or discontinue use in potentially hazardous situations.
Main socket
lightly /
Phones jack
For connecting the
headphones / earphones.
CAUTION
Avoid using headphones / earphone at high volume. Hearing experts advise against continuous, loud
and extended play. If you experience a ringing in your ears, reduce volume or discontinue use.
Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to
the people around you.
The use of optical instruments with this product will increase eye hazard.
VOL (Volume)
Adjust the volume.
Keep
depressed :
To go back at high speed
(search).
If you have any questions or problems concerning your unit, please consult your nearest dealer.
INFORMATION (For the customers in USA)
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following meaures :
POWER SOURCES
Using with batteries
DISC PLAYING
-
-
-
-
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the euipment into an outlet that is on a circuit different from the one the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.
1. Open the CD tray with the “OPEN” button.
2. Insert the CD with the printed side facing upwards and push the disc gently unit it clicks so that the
disc fits into the pivot.
3. Press the CD door to close.
Insert two size “AA” batteries (LR6 or SUM-3 alkaline) according to the “
” and “
” marks correctly
aligned.
You are cautioned that any changes or modifications not expressly approved in this manual could void
your authority to operate this equipment.
Notes on batteries
•
•
•
Insert batteries with correct polarity.
On display windows
Do not use old batteries together with new ones or different types of batteries together.
If the electrolyte inside the battery should leak, wipe the contaminated parts in the battery compartment
with a cloth and replace the old batteries with new ones.
For the Customer in the United Kingdom and / European countries
When you press “
”, the display window shows :
This Compact Disc player is classified as
CLASS 1 LASER product.
The CLASS LASER PRODUCT label is located
on the bottom exterior.
a
CLASS 1 LASER PRODUCT
•
•
When the unit is not to be used for a long period of time, remove the batteries.
Do not mix old new batteries.
APPAREIL A LASER DE CLASSE 1
PRODUCTO LASER DE CLASE 1
PRODUTO LASER CLASSE 1
Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable (NICKEL-CADMIUM) batteries.
First track playing begins
Total number of tracks
Notes on “
”
•
During playback (batteries are in use), “
” is off.
During play
•
When the battery voltage level is low, “
” will light for approx. 10 ~ 15 minutes, playback still
The track number of the current selection appears.
For the Customers in Canda
continues in this period.
When “
” is press during play, total number of tracks on the disc will be displayed and the unit still on.
This apparatus complies with the Class B limits
for radio noise emissions set out in radio
interference regulations.
•
•
Playback would automatically come to a stop when the batteries have no more power. Do not repeat
pressing “ ” as the unit may operate incorrectly. Replace all the batteries with new ones.
” would not be on if an AC adaptor is used.
If “ ” is pressed again the unit will be returned to full stop mode. If “
” is pressed the unit returns
to play mode. The unit will be returned to full stop mode automatically after approximately 35 seconds if
no button is played again within 35 seconds.
CAUTION
INVISIBLE LASER RADIATION
WHEN OPEN AND INTER-
LOCKS DEFEATED.
“
This product contains a low power laser device.
After approx. 35 sec.
is pressed once.
Using on house current
If the unit you purchased does not include an AC power adaptor, please use a 6V 350mA AC power
AVOID EXPOSURE TO BEAM.
adaptor. Plus pole “
” to the centre pin of the 3.5mm socket.
When the unit is not be used, be sure to disconnect the AC power adaptor.
Full stop mode.
Track 5 is playing.
DISC playing stops and total
number of tracks is shown.
PRECAUTION
On safety
During pause
The playing track number will flashes.
As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble
the casing. Refer servicing to qualified personnel only.
Do not put any foreign objects in the safety slot inside the disc compartment. If you do so, the laser beam
may come out when the lid is opened.
Do not put any foreign objects in the DC in 6V (external power input) jack. Should any solid objects or
liquid fall into the unit, disconnect the power supply and have the unit checked by qualified personnel
before operating it any further.
Pause mode of the second track
When no disc is inserted onto the player and when “
” is pressed, the display window shows “
”.
The unit cannot be operated when error message is displayed. After approx. 35 seconds the unit will
return to full stop mode, or reset the player by pressing “ ” once and then insert a disc start playing.
On operation
Since the CD system offers a wide dynamic range, the peaks of the high level inputs are recorded with
high fidelity, and the noise level is very low. Do not turn up the volume while listening to a part of the disc
with no audio signals or very low level inputs. If you do, the speakers may be damaged when the peak
level of the sound is played. The lens on the disc table should be kept clean. Do not touch the lens or
poke at it. If you do, the lens may be damaged and the unit will ot operate properly.
|